Rag rugging techniques

Using the cloth rugger.

The rag rugger is employed to pull short pieces of fabric (about 25mm x 80mm) through hessian backcloth. There''s no have to knot the pieces, simply as long as sufficient pieces are placed in; the greater amount of components of fabric into the hessian, the tighter the weave becomes - this grips the bits of fabric and keeps all of them from coming-out again. This is the method individuals regularly turn their old clothing into a rug, utilizing a sack given that backcloth.

The essential technique.

Very first take-up several strands inside hessian backcloth utilizing the point associated with rugger and press it all the way through as far as it's going to get. There'is no need to be exact, it''s not too type of craft, but taking on too many strands (more than 6, say) means the strip of cloth won''t be pinched securely enough in the centre; and, worse, one strand taken up on it''s own is liable to grab.

Cutting within the cloth

Very first, you need lots of cloth. Cloth rugs are often heavy - they normally use many product. Thankfully there's lots of old cloth about. Inside their heyday cloth rugs were created by those who only cannot manage to get a rug; oahu is the ultimate 'hard times' craft. Now that we are swamped with cast off garments it's easy to discover tons of fabric making that one of cheapest crafts around ' in order to remain real to it is customs and cut costs in addition.
Nearly every particular cloth can do. So long as it does not really disintegrate when it's cut up it will likely be fine. Some good sense is all that's needed - thin fabric can certainly make a lighter, softer rug; thick cloth is going to make a heavier, harder carpet. You can also experiment with non-textiles - provider bags work interestingly really, for example, and there's certainly no shortage of them. Charity shops and jumble sales are usually the best wagers for old cloth.

Once you have got your material it requires to be slashed into small pieces - a perfect size is about 25mm (1") x 80mm (3 "). Don't worry - it generally does not need to be a big work. Lengthy strips, 25mm broad, could be either torn or cut. If material obviously tears in a straight line (like woven cotton or poly/cotton) after that snipping the side and tearing away may be the easiest response; nobody likes a torn edge, due to the fact regarding the threads that can come from it, but there is always the choice to cut. Materials that wont rip in a straight range (like cotton jersey or poly fleece) could be slashed into lengthy strips interestingly quickly by folding all of them many times, always in the same path, then cutting across the fold. Either sharp scissors or a rotary cutter and cutting mat can do the task. The strips you will get because of this probably won't be lifeless right but try not to fret - once they truly are slashed into short pieces it's not going to make a difference after all. Tip: if you should be cutting folded cloth it's wise to put a couple of clothing pegs over the creased side, to help keep the folds in place, before you start.

Having cracked the difficulty of getting long pieces after that comes the cutting all of them into brief pieces, exactly about the same size, issue. The answer is a straightforward cutting gauge. This is merely a wooden baton with a groove cut along one side.